Fuel Tank and Engine Guard

Cagiva Elefant 750/900

Part number 501.702

Installation instructions

Rear end LHS & RHS (A)

Disassemble rear engine mounting bolt and aluminum spacer.

The mounting bracket (L-shape) of the engine guard will be mounted from the outside to the inner side (frame, spacer, EG, engine housing).

Replace the OE aluminum spacer with the ones from the kit.

Parts: 1 x aluminum spacer 25 x 10,5 x 21,5 mm

1 x aluminum spacer 25 x 10,5 x 16,5 mm

LHS front lower (B):

For assembly please use: 1 x rectangular clamp shell M8

2 x washer d 8,4 mm

2 x stiff nuts M8

The rectangular clamp shell has to be mounted to the frame from the outside to the inside.

RHS front lower:

Remove both fixing screws from the footbrake cylinder. Connect the mounting bracket (flat shape) of the engine guard from the outside of the frame with

2 x INBUS screws (Hexagon inr head?) M6 x 30

with the brake cylinder.

Front upper LHS and RHS (C):

Connect the front upr fixing brackets of the engine guard (below the oil

cooler) with the flat metal bracket. The assembly should be done with

2 x Hexagon screws M8 x 25

4 x washer d 8,4 mm

2 x stiff nuts M8

After installation please make sure that all connections have been fixed properly